Bronze Hardware Maintenance Suggestions

Outdoor bronzes require a maintenance program which keeps their surfaces clean and waxed on a regular basis. Good maintainence can give you a lifetime of beautiful bronze gate hardware!

Never use spray or liquid furniture polishes to clean your bronze hardware. These polishes may contain oils which could damage the original patina finish.

In climates with higher humidity, or if you live where there is a higher concentration of airborne pollutants, cleaning and waxing may be needed twice a year.

Applying Wax

All bronze darkens with age, however waxing may slow the process of oxidation.

To apply the wax, you need two (2) – 1″ to 2″ paint brushes that will be used only for cleaning your bronze. Do not use brushes that you have used for other purposes as chemicals may remain in the bristles and if transferred to the patina finish, may cause permanent discoloration.

Start by applying a protective circle of tape around the metal ferrules that hold the bristles in the brushes you are using. This will help prevent scratching of the surface when applying the wax and when dusting.

Wipe your bronze free of any dust and fingerprints using a clean, dry, cotton cloth. Use one of the brushes to remove dust from small crevasses or hard to reach places.

Use “Renaissance” wax, or other “microcrystalline” waxes in most cases, because it is inert and will not yellow over time. Apply to the second brush, use three or four, back and forth, sweeping strokes.

Do not dab your brush in the wax. This could cause an abundance of wax to be applied to the bronze that could actually harm the patina surface. Dab your brush on the lid of the wax can to remove any excess wax. Lightly apply a super thin coat of wax to the surface of the bronze using gentle sweeping motions. Apply more wax to the brush as described, working it down into crevices.

Caution – Using too much wax may remove previous layers of wax. It is very important not to apply too much wax or work it into the surface to vigorously. Cover the entire surface with wax and let it dry according to the directions on the container.

Separate Your Brushes

Keep your brushes separately in labeled bags, free from other contaminants, for future use.

Using a clean, dry, cotton cloth, gently rub in a circular motion, the dried wax from the bronze surface until you achieve the desired shine. To achieve a dull surface, do not rub the surface after waxing.

To achieve a better protective coating, you may want to re-apply a second coat using the same technique.

Posted with Permission. View Decorative Hardware from Coastal Bronze

Advertisements

About Martell Hardware

Martell Hardware is an online retailer of decorative cabinet hardware, door hardware, window & shutter hardware, and kitchen & bath hardware to match many types of decor styles.
This entry was posted in Technical Info and tagged , . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s